留言咨询

走線方案1：開啟式插座

插座的一邊有和主板邊角相同的凹槽，蓋板可以直接搭在插座邊角上，從而將插座和地板固定在一起。

適用範圍：所有強電和部分重要弱電信息點都可以採用開啟式插座。

優點：操作簡單，佈線進度快，只需簡單的手工鋸和螺絲刀就能輕鬆完成佈線。

走線方案2：走線口

在主板或蓋板任意位置，開50mm圓孔，並搭配塑料走線口。弱電可以直接穿出使用，強電可以在引出後接插線板，或者引到隔斷底部另接塑料面板。

使用範圍：所有弱點信息點都可以採用此方式，部分強電則視情況而定。

優點：操作簡單，成本低，一個空可出5-10根線纜，普通開孔工具即可完成。

走線方案3：普通彈起式地插座

在房間內任意位置根據需要將彈起式地插座固定在地面上，鋪裝地板過程中遇到插座時即切割地板。

使用範圍：所有強弱電信息點(只適用於50mm高度底板)

優點：容易採購，成本低，而且不局限於底板的位置和形狀。

* * * * * *

創世服務有限公司是一間提供專業數據中心架設公司，擁有一群專業團隊貼心地關注客戶的要求，並提供優質的服務。

想了解更多關於「機房底板走線方案」的內容，請瀏覽創世官網：http://livservices.com.hk

地址: 香港觀塘鴻圖道37-39號鴻泰工業大廈4樓4室

電話：852-31063235

——————

The machine room floor plan

Route 1: open outlet

The one side of the socket has the same groove as the main board, and the cover can be directly attached to the corner of the socket, so that the socket and the floor are fixed together.

Applicable scope: all strong current and some important weak electrical information points can be used with open outlet.

Advantages: simple operation, fast wiring, simple hand saw and screwdriver can easily complete the wiring.

Route plan 2: walk the line

Open 50mm round hole at any position of the main board or cover plate, and go with the plastic walk. The weak current can be directly used in the use, the strong electricity can be led to connect the line plate, or lead to the partition at the bottom of the plastic panel.

Use range: all vulnerability information points can be used this way, and some of the strong power depends on the situation.

Advantages: simple operation, low cost, an empty 5-10 cable, common open hole tools can be completed.

Route plan 3: ordinary spring socket

Any position in the room according to the need to be installed in the ground, in the process of laying the floor in the process of the outlet is cutting the floor.

Scope: all strong and weak electrical information points (only for 50mm height base)

Advantages: easy to purchase, low cost, and not limited to the position and shape of the bottom plate.

* * * * * *

LIV is a professional data center to set up a company, with a group of professional team intimate attention to customer requirements, and provide quality services.

For more information about 'The machine room floor plan'，please visit : http://livservices.com.hk

Address: Unit 4, 4/F., Hung Tai Industrial Building,37-39 Hung To Road, Kwun Tong, Hong Kong

Tel: +852 3106 3235